Pages

▼

Friday, 7 April 2017

Desert Terrain Day 03

I was feeling a bit under the weather at the beginning of the week so didn't do any more work on Monday or Tuesday. And I forgot to take pics last night (not that there would have been much to see). I had finished shaping the hills with the hot-wire cutter, glued them onto ePVC bases then I made a quick pass with the cutter to blend the edges to meet the base. Today I took the hills to work and sanded them during my lunch break.

This evening I did some work on the field, plantation and dunes bases. I started off using Milliput but realised I wouldn't have enough and it probably wasn't ideal. So I switched to Das air-drying clay.

Here's a pic of everything so far:



After work I made a trip to 4D Modelshop to buy some more ePVC sheets - I'll be cutting a base for the "impassable" terrain piece to go on and also cutting some strips for roads and rivers..I also picked up a Foam Factory 2-in-1 hot-wire kit which includes a cutter/router and a hot-knife. The former will be the most useful as it gives a larger "throat" for cutting and sculpting.
at

6 comments:

  1. Norm7 April 2017 at 06:05

    Tamsin, I found that air drying clay lifted at the edges while drying, causing a warping of the board edge. Does ePVC help avoid that?

    ReplyDelete
  2. Michael Awdry7 April 2017 at 07:41

    Sorry to hear that you've not been on top form, looks like you are getting back on track now.

    ReplyDelete
  3. Jon Meech8 April 2017 at 09:53

    I have experienced the same trouble with air-drying clay as Norm. I usually model something separately, then have to glue it to a base and fill gaps. Very long winded.

    ReplyDelete
  4. Ray Rousell8 April 2017 at 18:39

    Looking good Tamsin.

    ReplyDelete
  5. TamsinP8 April 2017 at 20:47

    @ Norm - yup, I'd forgotten that. When I saw your comment yesterday I checked and they'd warped. I have been able to recover them though :)

    @ Michael A - thanks! :)

    @ Jon - that's what I've ended up doing with the dunes; for the field and plantation ditches I've got an idea... :)

    @ Ray - cheers! :)

    ReplyDelete
  6. Unknown18 May 2017 at 18:44

    What is ePVC? Is that foam board? Im making desert dunes for FOW.

    ReplyDelete