The Eureka figures got primed (well, eleven of them did); the figure that had lost the tip of it's Owen gun had a new barrel tip created using 0.5mm piano wore and green stuff (the picture above shows it before shaping of the cured putty); the Patrol markers and basic jump off points were airbrushed green and had Aussie flags added (and were later sprayed with matt varnish). I also airbrushed a Chain of Command dashboard (from Warbases) with the same green.
I also airbrushed some casualty counters (for recording "shock"), some "pinned down" tokens and some "broken" tokens (all from Warbases).
Work on the Owen gun:
 |
| Wire inserted, green stuff added |
 |
| Green stuff shaped |
 |
| Close-up of the shaped green stuff |
I've also done a bit of work on the non-basic jump off points:
I need to add a few more bits before priming and painting them.
Brave girl, modifying a broken gun! I am never happy getting that perfect alignment!
ReplyDeletegood job on the gun, makes me more inclined to have a go at repairing some of my 'wounded' troops.
ReplyDeleteCracking progress Tamsin.
ReplyDeleteGreat progress Tamsin.
ReplyDeleteGood choice with Chain of Command.
ReplyDelete@ Herkybird - by brave, I take it you mean stark raving bonkers? ;)
ReplyDelete@ Norm - cheers! You just have to be very careful with drilling the hole for the piano wire to go into :)
@ Michael A - thanks! :)
@ Ross - cheers! :)
@ Lead-Lined - yup, CoC seems much better than Bolt Action, plus people at the club play it :)